One quirky detail of my build: it has a tiered storage system through FuzeDrive. What that means is I have an 8 TB shucked hard drive and a 128 GB SSD “fuzed” together through some old software by Enmotus that is no longer available for purchase iirc. This means the SSD acts as a cache for my huge 8 TB drive. As a result, I can just install basically any game I want to my massive 8 TB drive without worrying about space, and if I play that game more than once or twice, it’ll automatically move to the SSD portion for faster access.

Some ideas:

  • Is this using used hardware that has a story?
  • Got an unusual configuration that isn’t normally seen (Dual RTX 3070 for example)
  • Did you paint it or add special lighting?
  • Sir_Kevin@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    My build doesn’t have a PSU. Instead it has a voltage regulator. I live in an off-grid RV so my PC runs off a battery bank. There is no AC/DC conversion.

      • Sir_Kevin@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Oldass i7, 32GB RAM, couple of SSD’s, RTX 2060 12GB underclocked to reduce power, no monitor since it’s a VR machine/stable diffusion server. Wirelessly connects to a Pico 4.

        For older hardware it manages to run everything I throw at it.

        • Karmmah@lemmy.world
          link
          fedilink
          English
          arrow-up
          0
          ·
          1 year ago

          Oh that’s more than I expected. I thought you would just power something laptop like by the battery. How long can the system stay up?

          • Sir_Kevin@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            It’ll run indefinitely while idle. I usually put it to sleep when I’m not using it though. I’ve got a 600ah battery bank so I can pretty much run it as long as I need to under load without fear. My air conditioning is the thing I have to keep in check.

  • _MoveSwiftly@lemmy.worldM
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Previous build: It was 4.5L. What makes it unique is the finickiness, because it was shutting off with stock settings and it uses a Dell 330W power brick. I had to down volt both the CPU and GPU, and it worked well for ~6 years.

    Current build: It’s a 4090 and 7800x3D in a 10L case.

  • Soepkip@feddit.nl
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    My build is special because I use a very old server case that I have remodeled the interior of and is so ugly i hide it behind my monitors.

    It does the job. No LEDs, no bling. It seems to be the exception.

  • KairuByte@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Apparently my use of a QuadStellar is quite jarring to most. They aren’t expecting the size, nor the shape. Lmao

  • ODuffer @lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    1 year ago

    It’s a little big. Fractal Meshify 2XL. 420mm AIO. I was fed up of ‘poky’ cases!

  • Compositionfail@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Mine is a series of continous upgrades from my first build nearly 20 years ago. It’s on its 8th mainboard generation and every part has been replaced at least 4 times, but I’ve never replaced the whole thing in one go so I consider it the same machine. Very Ship of Theseus situation.

    I have a spreadsheet of basically every part and upgrade back to the original build.

    Unrelated, I used fuzedrive with a 1tb ssd and a 3tb mechanical for a while as well. Works pretty well.

  • XYZinferno@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I opted to use an old Cooler Master CPU fan from a Windows Vista eMachine that I had in my home. Went from cooling a AMD Athlon X2 to a AMD Ryzen 7700X.

    Having looked up the model number when building my PC, it’s apparently a model that wasn’t meant to be sold individually, or at least, I couldn’t find any places that sell or sold that specific model previously, beyond a few old eBay listings.

    May not be the best practice to re-use old CPU fans like that, but monitoring the temps when running higher-end games, it seems to be doing the job just fine!