I run a full media server, as well do a few friends. Now we had the idea to share our media libraries. In a first quick attempt we, mounted each other’s library folder via an smb share and imported those in jellyfin (all servers connected by VPN) Works quite well, but is kind of cumbersome the more people get in. I had the following idea: distributed storage, not as in redundancy, but more like mergerfs. Each “node” allocates a certain amount of storage, say node A, B and C provide 1TB each, these get fused into a singe mount that shows up as 3TB volume. If one node goes offline, the volume will only be 2TB and all files on the offline node will of course be unavailable.
Did a bit of research and found stuff like ceph,.glusterfs or seeweedfs, all of which I guess have a lot more functionality and thus are quite complicated and a little over my head. Do you do something like that or have any good ideas how to do that easily?
I use Plex instead of jellyfin, but there’s the ability to just add a friends library and it pulls in without mounting anything. I thought Jellydin had that as well?
I run Plex too, and indeed library sharing is built right in and ridiculously easy to set up.
I think OP is already doing things the best way possible in Jellyfin by mounting others’ servers remotely over VPN
plex uses a centralized service for this kinda of nonsense. most of us are using standalone server products.
this use case calls for either centralized storage (s3 bucket) or access mechanism(all them vpns) to distributed channels (ala plex)… but friends dont let friends use plex.
im curious about ipfs as distributed file systems sound like a new kink i should have
but friends dont let friends use plex.
I would love to get rid of Plex, but jellyfin failed the spouse test last summer and it never really liked my GDrive mount
Plus, Plex clients are everywhere, so it’s all but guaranteed that whoever I decide to onboard is going to have something compatible. I’ve even had early smart TV’s from like 2013 with that weird Yahoo app store thing that had a Plex app that still worked even when the Netflix app didn’t lolol
Funnily enough, my wife is the only person who likes jellyfin. It works perfectly for her. Everyone else? I’ve never had it work even once. And I have no damn idea why.
ha, i feel ya on the spouse. in the house i use local kodi on pis with a shared backend. that same source runs jellyin for the kids/outside the house
ive had the same interface for the wife on kodi/xbmc for probably 10 years
ive found kodi+jellyfin fits all my use cases
tell me why i shouldn’t use plex as I’m always tempted by it whenever these threads come up and everyone who uses it is so happy.
But free/libre is so much more delicious.
But don’t let the perfect be the enemy of the good.
Does Plex work for you? Keep using it.
Jellyfin is nice but has a long way to go to replicate the features of Plex [like PlexAmp and Sonic Analysis] and features that are “Plex adjacent” [like Tautulli].
deleted by creator
Does Jellyfin have:
A dedicated music app?
Music filtering/smart playlists? Sonic analysis?
Good 4k/x265 performance?
Has a third party (or built in) utility that shows me streaming usage per person?
Allows me to limit remote users to streaming from a single IP address at a time?
Let’s me watch something together with another remote user?
Has an app for most any device (like Plex or Emby) that does NOT require sideloading?
Has built in native DVR steaming/recording support?
Two factor authentication?When it does, I’ll switch.
I know you want a single ‘yes’ for the whole package which is fair, and Jellyfin doesn’t offer all of these things, but I’ll at least mention:
-
A dedicated music app?
- Its FOSS and there are several excellent apps in my experience worth looking into. I absolutely love feishin (for jellyfin or navidrome). On android I’ve liked finamp and Gelli.
-
Music filtering/smart playlists?
- smart playlists - Not that I know of
-
Sonic analysis?
- not that I know of
-
Good 4k/x265 performance?
-
I actually am not sure what issues you have here. Are you talking about transcoding it? I most often use native play and so long as the device receiving x265 can handle it I’ve never had issues
-
Has a third party (or built in) utility that shows me streaming usage per person?
-
Allows me to limit remote users to streaming from a single IP address at a time?
- single IP, I am not sure. But you can limit the number of simultaneous connections they can have (e.g. only one stream, etc). I realize that doesn’t have the same exact result in edge cases.
-
Let’s me watch something together with another remote user?
- Yes. Syncplay exists on it. I have had good experiences with both users in browsers app. But on webos TV app it doesn’t work for me.
-
Has an app for most any device (like Plex or Emby) that does NOT require sideloading?
- Pretty sure they have webos/android TV apps, android, iOS, a desktop player, web interface. I have first hand experience with android, web interface, Linux/windows, webos. There is a roku app, but I don’t knknow if it requires sideloading.
-
Has built in native DVR steaming/recording support? Jellyfin DVR capabilities exist, but I can’t speak to them.
-
Two factor authentication? Unfortunately, not. I think there are hack ways to pass it through other validators/credentials, but I agree it needs native support of some kind.
For the music gripes - honestly, navidrome IMO. If folks are happy with experience with Plex for everything, I am happy for them, but libraries specialized for media types can have big benefits and focused features.
- Video: Jellyfin (or Plex)
- Music: Navidrome
- Audiobooks: audiobookshelf
- Podcasts: still searching. I partially use Audiobookshelf here but don’t love it for podcasts.
I’m looking for the truth, not just a blanket “yes”.
-
I’ve really become into the Plex music app over the iOS music app; it does so much more (especially with the sonic analysis)
-
Not transcoding x265; solid x265 playback without transcoding.
-
Will have to look at Jellystat and see how it compares to Tautulli
-
2FA is pretty important, though I know that’s offset by the fact that you can authenticate locally.
-
-
last time i checked plex required an account on their service. thats a big red flag for people who host their own shit.
This
deleted by creator
Can you not just use a reverse proxy for your jeyllfin server and add multiple servers to the same client?
jellyfin addresses files locally. i dont know how you could stitch together remote machines
I’m surprised the client doesn’t support switching between servers. When I had jellyfin running I exposed it through traefik to allow external playback. Figure it would make sense that you could just show multiple servers in the UI. Add several reverse proxied addresses and boom.
You definitely can. Idk why the commentor above you thinks its local only?
I have two severs I swap between exactly like you describe.
Thats what I thought.
Then I have multiple jellyfin servers in the app… That’s not what I want, I want a single mount where all the media of all nodes is accessible
yeah, that might work for what op is tryin to do, maybe, assuming jellyfin fits his client needs
Another one to have a search for is IPFS.
All files stored on IPFS are public. It’s also incredibly slow and inefficient. You would be better off using BitTorrent.
Likely not the solution you’re looking for but a buddy and i link a folder via syncthing and anything added to one side shows up on the other.
I use synching too, but it’s not what I’m looking for here.
Ceph, GlusterFS, and I suspect SeaweedFS (but I haven’t used it) expect high speed, low latency connections to their peers. So they won’t work well over the internet.
There’s some info floating around about using IPFS as the backend for Jellyfin, which in theory should allow you to share media between friends, but I haven’t tried it.
Here is an alternative Piped link(s):
https://www.piped.video/watch?v=PHujBhq4J9A
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
Seems to me the easiest solution would be each host a replica. Now that you can get 8TB for something like a hundred bucks this would be both faster and more redundant if one would fail
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters Git Popular version control system, primarily for code IP Internet Protocol Plex Brand of media server package VPN Virtual Private Network
4 acronyms in this thread; the most compressed thread commented on today has 6 acronyms.
[Thread #399 for this sub, first seen 4th Jan 2024, 03:05] [FAQ] [Full list] [Contact] [Source code]
What’s the cumbersome part?
VPN? Mesh overlay VPN like tailscale/nebula mesh can do easy node add.
IPFS nodes might do the trick as mentioned.
On each node, map all the other nodes as smb, and configure all in jellyfin.
It would be nicer to have one single mount.
What about using symlinks?
You creat a directory /media. Mount shares there. Your media application scans /media and just finds media files.
Still sucks because you have to mount each repo, /media/person1/movies, etc
But you don’t have to reconfigure media app anymore.
I don’t know what a pooled remote file system like what you’re wanting.
Why do you use SMB instead of just connecting to the different jellyfin servers directly via VPN?
One big shared media volume has multiple benefits, each server just have to deal with their own user management, no server switching or remembering if that one movie is of this or that Server…
I think you can keep doing the SMB shares and use an overlay filesystem on top of those to basically stack them on top of each other, so that
server1/dir1/file1.txtandserver2/dir1/file2.txtandserver3/dir1/file3.txtall show up in the same folder. I’m not sure how happy that is when one of the servers just isn’t there though.Other than that you probably need some kind of fancy FUSE application to fake a filesystem that works the way you want. Maybe some kind of FUES-over-Git-Annex system exists that could do it already?
I wouldn’t really recommend IPFS for this. It’s tough to get it to actually fetch the blocks promptly for files unless you manually convince it to connect to the machine that has them. It doesn’t really solve the shared-drive problem as far as I know (you’d have like several IPNS paths to juggle for the different libraries, and you’d have to have a way to update them when new files were added). Also it won’t do any encryption or privacy: anyone who has seen the same file that you have, and has the IPFS hash of it, will be able to convince you to distribute the file to them (whether you have a license to do so or not).
Could you use symlinks? Not sure what the “gotchas” or downside to this approach is though.
Downside: it’s entirety manual and not scalable whatsoever.
Could you explain further? Wouldn’t this just need to be setup once per server that OP wants to connect?
