It depends on the subject area and your workflow. I am not an AI fanboy by any stretch of the imagination, but I have found the chatbot interface to be a better substitute for the “search for how to do X with library/language Y” loop. Even though it’s wrong a lot, it gives me a better starting place faster than reading through years-old SO posts. Being able to talk to your search interface is great.

The agentic stuff is also really good when the subject is something that has been done a million times over. Most web UI areas are so well trodden that JS devs have already invented a thousand frameworks to do it. I’m not a UI dev, so being able to give the agent a prompt like, “make a configuration UI with a sidebar that uses the graphql API specified here” is quite nice.

AI is trash at anything it hasn’t been trained on in my experience though. Do anything niche or domain-specific, and it feels like flipping a coin with a bash script. It just throws shit at the wall and runs tests until the tests pass (or it sneakily changes the tests because the error stacktrace repeatedly indicates the same test line as the problem).

I don’t think you can advocate for anything even remotely on the “right” in political discussions anymore unless you mean MAGA. That well is so poisoned at this point that everyone is going to assume you’re a MAGA troll wearing a mask the second you voice any right-leaning opinion.

It’s pretty unfortunate. There are plenty of “live and let live” types in the US that identify informally as libertarians and would make great allies.

Brother, what Lemmy instance do you think this community is on? You aren’t going to get a good discussion with this topic here.

The Battletech books from before the Clan invasion had female characters written almost exclusively to be love interests. I’m re-reading them all and boy, are those parts cringe. There’s only a dozen or so books pre-Clan, but if you read them you’ll see what I mean. Most of the time, those characters can’t pass the Bechdel test in scenes by themselves; they’re constantly thinking about a male love interest no matter what’s happening.

The Clans have a totally different culture where people are bred in vats rather than being born naturally, and are all about glory and combat. Sex exists for fun, but not romantic relationships (mostly). As a side effect, the authors of those books had to write female characters that didn’t revolve around a man.

Employees have to pay for basically everything in the US, so salaries have to be a lot higher here. School, childcare, healthcare, retirement, you name it. Also, all those things are more expensive here because they’re provided by companies that need to make a profit. It sucks.

Listed salaries are almost always what the employee pays, not what it costs the company. In the US, this includes the payroll tax, and cost of “benefits,” like healthcare and unemployment insurance, and is referred to as the burdened rate. This is separate from the income tax the employee has to pay to the government, mind you.

The burdened rate for most employees at the companies I’ve worked for in the US is like 20-50% higher than the salary paid. Not sure exactly how it works in France, but I do know there’s a pretty complex payroll tax companies have to pay. I think it’s something like 40% at the salary you quoted.

I’m not sure if you know this, but…that doesn’t fix most of the security issues in the linked list. All the reverse proxy does is handle hostname resolution and TLS termination (if you are using TLS). If the application being proxies still has an unauthenticated API, anyone can access it. If there’s an RCE vulnerability in any of them, you might get hacked.

I run Jellyfin publicly, but I do it behind a separate, locked-down reverse proxy (e.g., it explicitly hangs up any request for a Host header other than Jellyfin’s), in a kubernetes cluster, and I keep its pod isolated in its own namespace with restricted access to everything local except to my library via read-only NFS volumes hosted on a separate TrueNAS box. If there is any hack, all they get access to is a container that can read my media files. Even that kind of bothers me, honestly.

The overwhelming majority of Jellyfin users do not take precautions like this and are likely pretty vulnerable. Plex has a security team to address vulnerabilities when they happen, so those users would likely be a lot safer. I appreciate the love for FOSS on Lemmy, but it is scary how little most folks here acknowledge the tradeoffs they are making.

All I can say is that is not at all like my experience with Jellyfin. Every person I’ve ever shared it with wanted to go back to Plex. Most complaints had to do with the jankiness of the various apps. Lots of issues with the UIs acting funny, a few connection drops, and some settings not getting respected. I do also recall an episode of Severance that would not stream in the correct color space in Jellyfin but worked perfectly in Plex.

Yeah, I’m not interested in setting all that up and maintaining it for every user I share with. For myself, this is exactly how I access Jellyfin remotely, but I am not explaining to my remote family members how to set up a VPN on their TV.

If you want to be on the hook for all IT requests from folks you share with, this is a fine approach. There are people out there who honestly don’t have a problem with that and more power to them. I doubt they are the majority, and a lot of selfhosters completely ignore this aspect of software. There is a reason non-free services exist beyond just “capitalism bad.” I mean, capitalism indeed bad, but your time is worth something.

This will affect any server that does not already have a Plex Pass/ Lifetime Plex Pass. If your server does not have one, your remote users will have to pay. The service Plex provides is still worth it though, it largely just works on dozens of platforms and that shit isn’t free to make.

Sharing a Jellyfin server with others remotely is still a lot more complicated than it needs to be to compete (no, it’s not as simple as opening a port, and if you think so then you’re either lucky or you aren’t sharing with lots of folks). I run both and I would never try to share Jellyfin with non-technical people. Honestly, I wish Jellyfin would start offering an optional paid relay service to fund their development. They could use the revenue to improve their app ecosystem and still produce mostly open-source software. Homeassistant does this with Nabu Casa and it’s great!

That being said, the new Plex Android app kinda sucks ass. If there was anything that would make me switch it wouldn’t be having to pay for software, or services it’d be a garbage experience on my most common platform.

I’m in the same boat, I use Jellyfin where I can but Plex is still so much better for sharing, especially with non-technical people so I run both. Really hoping the Jellyfin folks realize they can sell a relay service to make some money and fund their development to improve the app. Seems to be working well for Homeassistant!

Jellyfin has this, but it’s kinda busted: https://forum.jellyfin.org/t-syncplay. There was one guy working on it and he apparently vanished. It still does work for some use-cases but be prepared for some rough edges.

Maybe someone will pick up the torch now that Plex is axing it?

It shouldn’t be any faster or slower if you’re using the exact same transcoding settings

That’s sort of the point, both are based on ffmpeg but neither is using vanilla ffmpeg. Plex’s seems to work a lot better on the same hardware for me, but more importantly it’s not something you have to fiddle with. You just check the box and it figures out a decent setting. Jellyfin has some basic defaults for Intel/nVidia but there are a ton of tweakable settings that you have to go figure out.

There’s probably some way to fix the issue but it’d take a ton of fiddling, and that’s the jank I keep referring to. A lot of people on Lemmy just ignore the rough edges and act like it doesn’t matter just because they can get past it or because it’s FOSS and they refuse to use anything else. Not everyone on here is a full-time software engineer, though; IMO it’s better to be honest about shortcomings and set expectations well. More people self-hosting their media is a net positive IMO.

Plex has people they can pay to make their product better (and at least for the moment they’re still paying them), Jellyfin straight up doesn’t have those resources. I hope that changes because Plex is not on a good trajectory as a company. The Homeassistant model seems like a good one that gives people a good reason to contribute code and money, I really hope the Jellyfin guys do something along those lines.

The Plex app for some versions of Android TV is way too chunky for the resources available. I’ve noticed it performs really badly with smart TVs and it seems to do worse the more background apps you have open, so I’m guessing it’s memory related. It generally seems to work better on dedicated devices like Google TV, although it does still wig out sometimes and need to be restarted.

My big beef with the Jellyfin app on Android TV is that they don’t include the fast scroll alphabetical bar the web UI has and the title layout is just posters. Everyone I’ve ever had use it complained that it’s just too hard to read. Plus if you have a big library, that leaves you with 2 navigation options: scroll a bunch or type something in with the on screen keyboard. Both of those kind of stink.

I’ve also run into weird edges with plugins in Android TV. I could never get automatic subtitles to work consistently. The skip intro popup just doesn’t appear sometimes or doesn’t skip correctly when pressed. I suspect there’s some translation error between the Android interface and the plugin interface.

Intro skipping works pretty well once you set it up and give it time to scan. Functionally, it identifies common audio to determine likely intros, so it can get confused with shows that have different intro music between episodes of the same season.

Don’t have to change any folder structures unless you were storing optimized media alongside the original files in Plex. All the metadata for both Plex and Jellyfin lives in a SQLite database in your config dir.

You may wind up transcoding even if you think you really shouldn’t have to. Browsers are weird about supporting some encodings, and both Plex and Jellyfin will automatically transcode to satisfy the client.

Hardware transcoding is huge, don’t underestimate how impactful it can be. A single 4K CPU transcode could saturate my 72-core server, but one A380 can transcode 3-4 4K streams at the same time. This admittedly doesn’t matter much if you only have one user, but keep it in mind if you ever have to share. It’s so annoying to have a stream start hitching because 1-2 friends decided to start watching something at the same time as you…

I still don’t have a good replacement for Plexamp either. I think Jellyfin can play music too, but I haven’t tried it myself. I spent a lot of time getting the metadata right in Plex and just haven’t felt like trying to find a way to migrate yet.

You can look at some of my other comments for more specifics, but from your language alone I don’t think you’re being objective here. OP states that Plex is flatly better than Jellyfin, and a bunch of Lemmy users hype it up because of a clear bias for FOSS. A reality check is a good thing, IMO; you can prefer a solution and acknowledge its faults, but people talking on the Internet tend towards extremes instead and that will disillusion anyone who tries Jellyfin expecting all the good parts of Plex but better.

I prefer FOSS everywhere it’s reasonable, but I think a reality check is healthy here. Jellyfin is full of jank that you may run into because a bunch of independent devs are all doing their own thing to make it. Plex is a for-profit entity pulling in the same direction, so the experience is generally going to be more seamless and supported.

I run both Plex and Jellyfin simultaneously. I use Jellyfin on my devices, except on Android TV because the app is painful to navigate. Plex is way better for sharing, but I usually offer both. I’ve yet to have anyone prefer Jellyfin, Plex tends to just work on their platforms of choice so they go with it. Unless they’re a technical person, it’s unreasonable to expect them to muddle through the edges of Jellyfin.

The performance of hardware acceleration in Jellyfin is markedly worse in my experience. My A380 can handle 2-3x more streams in Plex than it can in Jellyfin. My theory is that it’s the jellyfin ffmpeg port slowing things down, but I admittedly don’t have much evidence to back that up beyond the fact that Plex’s transcoder is built on ffmpeg as well.

Plex Relays are a feature, but that’s sort of the point. You get that stability from Plex by default and it works on all clients. There is no realistic way you’re going to get all remote client devices on a VPN for Jellyfin. Maybe one day Jellyfin can offer that as a paid option, a la Nabu Casa for Homeassistant.

Media servers tend to get shared around with friends and family and these edges will start to drive you nuts if you have more than a handful of users. I do not want to try to walk a family member through setting up a VPN on their smart TV.

Yeah, that part about Plex has always bugged me. You can disable logins for your server with allow-listed networks, but most of the non-desktop apps have to log into the Plex platform to run.

This isn’t about want, it’s a reality check. OP said jellyfin is better than Plex now, and by objective measure it is not better for most people yet. False expectations hurt Jellyfin adoption, you need to try it with the expectation of jankiness or you’ll just be annoyed by the edges.