- cross-posted to:
- technology@lemmy.ml
- cross-posted to:
- technology@lemmy.ml
cross-posted from: https://lemm.ee/post/41907712
You must log in or register to comment.
Unironically a good idea. I can see these really helping to increase the chances of memory survival in camera applications where the camera has a high chance of being physically destroyed. Also a metal body reallllly helps conduct heat out of the flash, which will increase their lifespan in continuous-write applications.
Stainless is extra bad at conducting heat considering it’s a metal, but it’s still way better than plastic. I hope they make an aluminum version at some point.
How strong is aluminium compared to steel again? Oh right, its butter…
Yes, stainless is “bad”, compared to other metals. But like you also mentioned, it’s loads better than plastic.
I’d doubt they make an aluminum one, it’s probably not worth the tooling.
When dealing with only 100-200mW, even a small change in thermal conductivity will make a big difference.
All the comments are fun and games but they could’ve used aluminium which is way cheaper. It’s nothing more than a marketing gimmick.
Was about to say
- cheaper
- lighter
- non-conductive
- softer, won’t wear the port
How is aluminum non-conductive? It’s literally used as a lighter and cheaper alternative to copper in wires
to my knowledge, the only place they use aluminum as a conductor is in overhead external transmission lines, because you can wrap them around a steel or fiberglass/carbon fiber core (due to the skin effect this incurs minimal losses) while increasing strength and reducing weight (with the composites at least)
the secondary reason is because you can just use more aluminum, since it’s not nearly as dense as copper, and also allows you to string farther, since again, not nearly as dense.
most aluminum wiring is actually cladded in copper, it’s called CCA for what should be fairly obvious reasons.
Also i believe the oxide coating of aluminum isn’t conductive? The bare material itself is, but once it oxidizes it’s probably not a good conductor, this is why we use shit like gold plated contacts. Copper also oxidizes as well, but it’s not nearly as bad.
Steam deck modders rejoice
Doesn’t the steam deck use micro SD cards, I don’t think that these full-sized ones are going to be much help for those guys. Unless of course they come out with stainless steel micro SD cards but that doesn’t seem likely for obvious reasons.
Maybe you can just trim them!
I feel like dealing with SD cards’ inevitable demise is more important than armoring them. What good is a stainless SD card that no longer functions after 2 years of use?
Well considering that most of the SD cards I’ve had always died from foul play or physical destruction of some kind I think that armoring them is not without merit.
Obviously like all solid state media they do wear out over time, and their wear leveling isn’t as good as an SSD which has a much more sophisticated controller with much more sophisticated wear leveling management.
What good is a stainless SD card
Better thermal conductivity and in turn dissipation than plastic does tend to longer lasting flash chips, how much this change means in real world practice though remains to be seen
Heat is a flash storage killer of all kinds
It’s hard to believe that it would have taken 25 years for the many SD card builders out there to figure out that a heat spreader could solve the degradation problems.
Why would they want to solve an issue that causes you to need a new product from them
Should have used glorious Nippon steel, folded over 1000 times.
