I am looking for a fediverse solution for a blog and I tried it with writefreely, but it has some disadvantages I can’t live with.
The most important one is, that it should be possible to communicate with people within the fediverse. People should be able to comment on every article with a fediverse account, like it is already possible between Mastodon, Pleroma, PeerTube and others. But comments aren’t a thing with writefreely and this is sad.
After using Lemmy for a few days I just thought if it is possible to use it as a blog and ask on lemmys github if it is possible to restrict a group so only one person could post new articles, but all others can comment. And the answer is yes!
But would it be possible to use it as a blog?
Imagine I would have a group called “utopify.org - Research & Development” and would post current progress about a blog series and you can only comment on it. Would it be possible and would it be something you want to see on Lemmy or would this just be an abuse of the software.
If all of this is just a no-go, are there other ways in the fediverse to have a blog article, which can be shared on the fediverse and be commented on?
Kbin has microblog.
You could… but it’s singly not setup for that. There are blog softwares out there that support activitypub-- I have no experience with it, but microblog.pub was nativity designed as an activitypub blog. There’s also a WordPress plugin that’s basically official (maintained by the company that owns WordPress.com) and has known good integration to at least mastodon, so I would assume it works well with lemmy, peertube, etc, since AFAICT, mastodon is the most opinionated of them when it comes to activitypub conformance.
microblog.pub
Ooof, the design of this website is pretty terrible. I couldn’t figure out where a post starts and where it ends or what is even part of a blog post or other stuff on the website?
And in general it really looks polluted and invites people to pollute. Not really something I was looking for. But thank you for mentioning it :)
You wouldn’t even need to host your own instance, really. You could create a community and check the option that only mods can post. But you can’t follow people on Lemmy.
What about calckey?
I think, currently I am traumatized because I was depended on other companies/people, which had the power to just destroy what I built up. If I will build up something new, it should be under my control.
I think calckey/firefish has too many features and might be overwhelming if you want to focus on stuff.
Holy Necro….since I’m here tho I think kbin is more set up with this. It has a microblog section although I haven’t really explored it.
The first time I’ve seen kbin, it looked like the old unstructured and cluttered version of reddit and the old version only was a unusable mess or only if you like being distracted by all the stuff, which is going on around the content you’re there for.
@utopify_org Wordpress has an ActivityPub plugin that may work in your case.
wow you’re posting this from frendica? do you see my comment? i know mastodon can see lemmy post but not up-to-date. Is it the same in frendica?
@65gmexl3 Yep they all talk ActivityPub! Friendica is one of the few that also supports Diaspora protocol so I can talk to people there too.
@65gmexl3 Oh and about your other question: it looks like you posted 2 days ago but I received it 13 hours ago at my server, so a little delay. Mainly the nature of working with federated servers is that things aren’t always instantaneous.
thanks foe the update. im curious if the federation issue is with friendica or lemmy
@65gmexl3 Looks like sending from my server was pretty quick, but I’m running a single user node on a probably overpowered server, haha. Could be something with Lemmy or just the amount of tasks your lemmy server is experiencing.
i went to your instance to view this lemmy post but while browsing site went down?
Internal Server Error
Apologies but the website is unavailable at the moment.
Request: acf0ba69361dd302df180527d98e9ebc
@65gmexl3 Hm, that’s strange. Could have been when i unplugged my router to do some housework. Downside of home self-hosting!
I’ve also had issues on mobile internet sometimes, as I think a few carriers don’t seem to allow connection to residential IPs. Have t had much issue with normal broadband, however.
I switched from Wordpress to a static website generator (Pelican), because it was bloaty and something broke like after every update.
If that would be possible, how would you moderate comments, seeing how random things can get? Federating with only approved finstances (federated instance)? What if you keep your blog, then push every post you make there to your solo-community on a finstance? You can engineer your comment section on the blog to pint here or fetch the comments content from fediverse to your blog…
If that would be possible, how would you moderate comments, seeing how random things can get?
I don’t know what you mean? If I am the admin of an instance or the moderator of a group, I could delete comments or is this just not possible?
Federating with only approved finstances (federated instance)?
Why doing this? Wouldn’t it be enough to block the illegal instances and those who are explicitly against your topics?
What if you keep your blog, then push every post you make there to your solo-community on a finstance? You can engineer your comment section on the blog to pint here or fetch the comments content from fediverse to your blog…
I am trying to be as green as possible. Having a blog on one server and the comments on another sounds like an inefficient way of using resources. Why not just put the articles where the comments are?
With Mastodon I had the same idea, that I will publish an article, post a link with short description on Mastodon and then use the Mastodon post as the comment section, then edit the blog article and put the link to Mastodon on the end of the article with a simple text link like “Comment section”.
But even this idea felt a bit odd and more unprofessional.
Lemmy looks like a really good solution to this atm.
If you’re looking for efficiency, nothing beats a static website.
To be honest, I think whichever approach you take is unlikely to have a significant effect on how much energy your website uses overall.
For example, servers in datacentres are very powerful and are able to run more than one thing at once. So if you were hosting your own Lemmy/Mastodon instance, there’d be no reason why you couldn’t also host a standalone website on that same server. The difference in energy usage would be negligible.
In contrast, you could argue that Lemmy is less efficient than a straightforward static website because the content of your blog posts will inevitably end up being federated to many other instances. That means multiple copies of your blog will be transferred between multiple servers and stored on multiple hard drives, etc. Whereas a static website lives in one place and doesn’t end up using so many resources.
At the end of the day, whichever you choose will likely have very little impact. So I wouldn’t worry too much about your blog’s green credentials.
I’m saying this as somebody who is pro protecting the environment, but also pro prioritising our efforts in the places they’ll have greatest impact. You’ll probably have a bigger impact by walking to the store instead of driving.
I’m saying this as somebody who is pro protecting the environment, but also pro prioritising our efforts in the places they’ll have greatest impact. You’ll probably have a bigger impact by walking to the store instead of driving.
Whataboutism isn’t really helpful, because you can believe me, that I have already optimized every other field in my life and people even call me extreme.
I really want to put the focus on this specific topic.
But you might be somehow right, that IF a server is already used for an energy consuming tool (like a fediverse tool [Mastodon, Lemmy, Kbin, FireFish, etc.]), the energy consumption is pretty low in comparison of the fediverse tool, if there is a static website running on the same server. What IF there isn’t this energy consuming tool?
Actually, I am really worried that this could be used as an excuse and the rebound effect takes effect, using a lot of tools on the same server.
There was a guy on GitHub that added a Lemmy comment section to his blog hosted on his website. So it’s already an accepted although niche usecase.
I feel like a single user instance of Pleroma would be more appropriate (and easier to host) but even though the character limit can be increased the remote limit of other instances might reduce your visibility, I am not sure.
Because Pleroma is pretty similar to Mastodon, I don’t think it will be good, because both use a time line and important stuff could go to the void if it was posted to the wrong time or it just goes down between a lot of content.
I just read these 2 blog posts recently where they are using ActivityPub for comments:
https://cassidyjames.com/blog/fediverse-blog-comments-mastodon/
https://fietkau.blog/2023/another_blog_resurrection_fediverse_new_comment_system
Interesting, I had a similar idea to just link to a Mastodon/Lemmy thread in the blog article, saying “Here is the comment section!”, because I want to keep a static website.
on my pelican generated website I have the rss feed of my mastodon account. I have a script that downloads & converts the rss and then pelican runs and regenerated and includes that on my site. Something similar might work with your idea for comments.
Can you show me the link, I am curious on how this look like?
https://mastodon.sdf.org/@saba/110470671030115751 here’s a mastodon post I made about it and on my site you can see my feed on the bottom of the page: https://chven.us/profiles/sam.html
Looks really nice!
If you decide to try the rss-to-html.py, let me know if you want some help or to see what I changed. I don’t know python well, but I did change a few things in it to get it to work right for me and to include the photos. Or if you come across anything else that does similar, I’d like to have a look at it.
Thanks a lot.
I will only link to a fediverse post in the end of a blog article like “Here is the official comment section”, because I want to keep my blog as static as possible.
Yes. IIRC it’s even discussed in the official docs. Basically just limit post creation on the server and allow comments.
The nice thing about open source is that in the future there might even be add-ons that better format it for blog display vs thread display.
Every time someone says IIRC in a topic about communication, I think they recommend to use IRC :D
I was just thinking that. You could either implement a way to render the linked content as an article, or allow more rich formatting in the text body itself.
Sure, why not?
Because of the “abuse of the software” I mentioned above.
But I think my current solution to this would be to keep the static website (blog) and just add a sentence there, like “Click here for the official comment section to this article”, linking to a Lemmy/Mastodon thread.
With this I can have the advantages of both worlds and even if I will change the blog software, the comment section will be the same, which is a big plus, because I already switched from Wordpress to Pelican and there was no way to backup comments.
Someone had mastadon comments on their blog. Maybe something similar?
Yes, I had the idea to put a link to a Mastodon/Lemmy thread in a blog article like “Click here for the official comment section”
Hi,
I’m feeling the same and wondering the same, did you ended up trying this, and if yes, do you have some advice on how to manage this particular use case ?
Thanks
