nar. HDDs don’t require power to maintain their state. So that’s an advantage they’ll always have over SSDs, which means there will be use-cases where HDDs are the better choice.
Moreover, iirc, there are 64TB 2,5" SSDs and 100TB 3,5" available for enterprise users, and 8TB M.2 SSDs on consumer market. Space is really not a constraint.
I believe the 100TB SSD is the one LTT showcased a few years ago?
My problem with M.2 and high capacity is them vharging an arm and a leg for it. The cheapest I can find on the quick side is a WD black 8TB for 698,99€ with tax.
You know how much storage space I can buy from 700€ in spinning rust? Quadruple the space of the single stick of nand.
Surprisingly a SATA TLC SSD is even more expensive at 814,93€ (Kingston DC600M). But SAS will cost you your whole arm.
The constraint may not be the size but the cost certainly is.
And if they put lower capacity NAND on the PCBs we could reduce costs
HDDs will probably always be useful for media storage, where quick access time isn’t required and it isn’t being used constantly. They should die for PCs though.
Exactly. I haven’t used a HDD in my PC for years, yet I bought HDDs for my homelab NAS. Unless SSDs get a lot cheaper, I’ll keep buying HDDs for on-prem bulk storage.
nar. HDDs don’t require power to maintain their state. So that’s an advantage they’ll always have over SSDs, which means there will be use-cases where HDDs are the better choice.
SSDs can reliably hold charge states for years, and there are storage media that are more reliable than HDD.
HDD’s would still find a niche, probably, as a balanced option, but said niche will likely get smaller and smaller over many years.
It will probably be a choice of quieter, faster, expensive vs loud, high capacity, pretty cheap.
Unless we start with 3.5" SSDs (pls), HDDs will always be storage kings.
Imagine 3.5" SSDs with 3-4 layer sandwiched PCBs…And inexpensive NAND…
Why is 3.5" preferable? You can always use a 2.5" to 3.5" adapter, and even 2.5" casing is mostly empty anyway
More volume for more NAND-PCBs
Does this count for the higher capacity drives (e.g. >2TB)? Preferably TLC?
Proud owner of 1TB Samsung 860 Evo.
Pretty much yes, it counts :D
Moreover, iirc, there are 64TB 2,5" SSDs and 100TB 3,5" available for enterprise users, and 8TB M.2 SSDs on consumer market. Space is really not a constraint.
I believe the 100TB SSD is the one LTT showcased a few years ago?
My problem with M.2 and high capacity is them vharging an arm and a leg for it. The cheapest I can find on the quick side is a WD black 8TB for 698,99€ with tax.
You know how much storage space I can buy from 700€ in spinning rust? Quadruple the space of the single stick of nand.
Surprisingly a SATA TLC SSD is even more expensive at 814,93€ (Kingston DC600M). But SAS will cost you your whole arm.
The constraint may not be the size but the cost certainly is.
And if they put lower capacity NAND on the PCBs we could reduce costs
HDDs will probably always be useful for media storage, where quick access time isn’t required and it isn’t being used constantly. They should die for PCs though.
Exactly. I haven’t used a HDD in my PC for years, yet I bought HDDs for my homelab NAS. Unless SSDs get a lot cheaper, I’ll keep buying HDDs for on-prem bulk storage.
doubt it would matter much, if you need long term storage you’re using LSO tapes anyway.
HDD might be nice for a bulk backup or just mass storage, but i think the primary driving factor for them is going to be cost.
SSDs are not flash memory.