• KyuubiNoKitsune@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    7
    ·
    10 months ago

    These fucking clickbait titles.

    It only really works with hard water, otherwise you’d have to add calcium to the water before boiling it, and they only tested it with something like 3 different plastics, and they’re the most benign and least reactive ones.

    This is not a magical solution to clean any water you boil.

    • Mkengine@feddit.de
      link
      fedilink
      arrow-up
      2
      ·
      10 months ago

      Could instead reverse osmosis remove those particles and be used as consumer products?

      • KyuubiNoKitsune@lemmy.blahaj.zone
        link
        fedilink
        arrow-up
        2
        ·
        10 months ago

        Yes to the first, as for the second, who knows, but most likely not, as it’ll be mixed plastics and you can’t just mix them all together and make something out of them

    • CanadaPlus@lemmy.sdf.org
      link
      fedilink
      arrow-up
      2
      ·
      10 months ago

      I was about to say. The headline sounds like the equivalent of removing mud from water by boiling it.

      Removing fine particles by aggregating them isn’t a brand new concept either, for what it’s worth.

    • frog 🐸@beehaw.org
      link
      fedilink
      English
      arrow-up
      3
      ·
      11 months ago

      I read the article. Apparently it only really works with hard water - that’s water with a high concentration of calcium carbonate. At high temperatures, the calcium carbonate becomes a solid, trapping the microplastics inside it, which is then removed from the water with a regular filter.

      • gregorum@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        11 months ago

        So, the boiling doesn’t remove it at all; it pre-treats hard water, making it capable of being filtered out afterwards.

          • averyminya@beehaw.org
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            11 months ago

            Would that just mean boiling water and then filtering it?

            If so, doesn’t seem as misleading so much as just missing an extra step for a headline. Edit: of course, in addition to the hard water specification.

  • Chris Remington@beehaw.org
    link
    fedilink
    arrow-up
    1
    ·
    11 months ago

    Luckily I have well water…probably some of the cleanest water on Earth…I’ve tested it several times with kits.

  • fine_sandy_bottom@discuss.tchncs.de
    link
    fedilink
    arrow-up
    0
    ·
    10 months ago

    Microplastics are tiny pieces of plastic debris measuring less than 0.2 inches (5 millimeters) long,

    That can’t be right. There sure ain’t 5mm pieces of plastic in my drinking water. 0.05mm would be hard to believe.

    • Inflo@sopuli.xyz
      link
      fedilink
      suomi
      arrow-up
      1
      ·
      10 months ago

      Not sure that’s correct, but 5 mm being the upper cap doesn’t mean they’re that long.

      • fine_sandy_bottom@discuss.tchncs.de
        link
        fedilink
        arrow-up
        1
        ·
        10 months ago

        I guess the author has just googled “define microplastics”… but when we think about microplastics in our drinking water we’re not thinking about 5mm pieces of plastic.

        A consumer grade filter will remove things larger than 0.0005mm.

    • B0rax@feddit.de
      link
      fedilink
      arrow-up
      1
      ·
      10 months ago

      Sadly, that is the definition of microplastics. I’m not sure why a 5mm piece is considered „micro“